Deep Well Convertible Pump

Deep Well Convertible Pumps




Click Image For More Details
1/2HP J5 Deep Well Cast-Iron Jet Pump

 

1/2HP J5 Deep Well Cast-Iron Convertible Jet Pump
Description: J5
HP: 1/2

 

SPECIFICATIONS

Pump:

  • Pipe connections: 1¼" NPT suction, 1" NPT dis­charge, 1" NPT drive (pressure)
  • Pressure switch: AS4 preset at 30-50 PSI

Motor:

  • NEMA standard
  • 60 Hz
  • ½ – 1½ HP, 115/230 V capacitor start (whether hooked up using 115v or 230v power consumption of the pump remains the same)
  • Single phase
  • 3500 RPM
  • Built-in overload with automatic reset
  • Stainless steel shaft
  • Rotation: clockwise when viewed from motor end
  • UL778 listed

Maximum temperature: 140°F

 

FEATURES

Convertible: May be used on shallow or deep well applications using appropriate Gould’s Water Technology fittings.

Serviceable:

  • Back pullout design for service without disturbing piping.
  • Two compartment motor for access to wiring and replaceable components.
  • Nozzle clean out plug in shallow well adapter.
  • Corrosion resistant, plastic tubing and fittings are easily removed for cleaning. Premium O-ring design fittings need only be hand tight to seal.

Impeller: F.D.A. compliant, glass filled Noryl®. Corrosion and abrasion resistant.

Diffuser (Guidevane): Bolt down Lexan® diffuser has stainless wear ring for extended performance in abrasive conditions.

Powered for Continuous Operation: Pump ratings are within the motor manufacturer’s recommended working limits. Can be operated continuously without damage.

Corrosion Resistant: Electro-coat paint is baked on.

Protected Mechanical Seal: Diaphragm retains water in the casing to ensure the mechanical seal can never run dry.

Excellent Air Handling Ability: After initial priming the pump has the ability to re-prime itself.

 

SYSTEM COMPONENTS

Basic Pump Unit: Includes pump and motor, pres­sure gauge and bushing, pressure switch with tub­ing and fittings.

NOTE: THE TUBING COMES CONNECTED FOR SHALLOW WELL USE. A DEEP WELL SET UP RE­QUIRES A JDW FITTINGS PACKAGE OR AN AV22 KIT.

Both include additional fittings and a 24" tubing to connect to a pressure control valve.

ADDITIONAL COMPONENTS REQUIRED

  • Shallow Well Package: Includes shallow well adapter, nozzle, venturi (diffuser), gasket, bolts and pipe plugs OR
  • Deep Well Package: Choose either a twin pipe or packer style.
  • Twin pipe includes jet body, nozzle, venturi (dif­fuser) and foot valve.
  • Packer includes packer body, nozzle, venturi (dif­fuser), and built-in check valve.

NOTE: Packer systems also require a packer adapter on the wellhead.

Deep well systems require a pressure control valve.

NOTE: YOU MUST HAVE A JDW OR AV22 KIT TO MAKE THE PRESSURE SWITCH CONNECTION.

Pressure tank required on all systems.

 

Does your application require higher pressure? See our high pressure multi-stage pumps by Gould's. Click Here

 

J Plus Deep Well Jet Pumps Ship "FREE"

 

View shallow well adapter

 

View the pressure control valve

 

Price: $697.00
Sale Price: $389.00
Available
Purchase Selections



Click Image For More Details
3/4HP J7 Deep Well Cast-Iron Jet Pump

 

3/4HP J7 Deep Well Cast-Iron Convertible Jet Pump
Description: J7
HP: 3/4

 

SPECIFICATIONS

Pump:

  • Pipe connections: 1¼" NPT suction, 1" NPT dis­charge, 1" NPT drive (pressure)
  • Pressure switch: AS4 preset at 30-50 PSI

Motor:

  • NEMA standard
  • 60 Hz
  • ½ – 1½ HP, 115/230 V capacitor start (whether hooked up using 115v or 230v power consumption of the pump remains the same)
  • Single phase
  • 3500 RPM
  • Built-in overload with automatic reset
  • Stainless steel shaft
  • Rotation: clockwise when viewed from motor end
  • UL778 listed

Maximum temperature: 140°F

 

FEATURES

Convertible: May be used on shallow or deep well applications using appropriate Gould’s Water Technology fittings.

Serviceable:

  • Back pullout design for service without disturbing piping.
  • Two compartment motor for access to wiring and replaceable components.
  • Nozzle clean out plug in shallow well adapter.
  • Corrosion resistant, plastic tubing and fittings are easily removed for cleaning. Premium O-ring design fittings need only be hand tight to seal.

Impeller: F.D.A. compliant, glass filled Noryl®. Corrosion and abrasion resistant.

Diffuser (Guidevane): Bolt down Lexan® diffuser has stainless wear ring for extended performance in abrasive conditions.

Powered for Continuous Operation: Pump ratings are within the motor manufacturer’s recommended working limits. Can be operated continuously without damage.

Corrosion Resistant: Electro-coat paint is baked on.

Protected Mechanical Seal: Diaphragm retains water in the casing to ensure the mechanical seal can never run dry.

Excellent Air Handling Ability: After initial priming the pump has the ability to re-prime itself.

 

SYSTEM COMPONENTS

Basic Pump Unit: Includes pump and motor, pres­sure gauge and bushing, pressure switch with tub­ing and fittings.

NOTE: THE TUBING COMES CONNECTED FOR SHALLOW WELL USE. A DEEP WELL SET UP RE­QUIRES A JDW FITTINGS PACKAGE OR AN AV22 KIT.

Both include additional fittings and a 24" tubing to connect to a pressure control valve.

ADDITIONAL COMPONENTS REQUIRED

  • Shallow Well Package: Includes shallow well adapter, nozzle, venturi (diffuser), gasket, bolts and pipe plugs OR
  • Deep Well Package: Choose either a twin pipe or packer style.
  • Twin pipe includes jet body, nozzle, venturi (dif­fuser) and foot valve.
  • Packer includes packer body, nozzle, venturi (dif­fuser), and built-in check valve.

NOTE: Packer systems also require a packer adapter on the wellhead.

Deep well systems require a pressure control valve.

NOTE: YOU MUST HAVE A JDW OR AV22 KIT TO MAKE THE PRESSURE SWITCH CONNECTION.

Pressure tank required on all systems.

 

Does your application require higher pressure? See our high pressure multi-stage pumps by Gould's. Click Here

 

View shallow well adapter

 

View the pressure control valve

 

Price: $841.00
Sale Price: $459.00
Available
Purchase Selections



Click Image For More Details
1HP J10 Deep Well Cast-Iron Jet Pump

 

1HP J10 Deep Well Cast-Iron Convertible Jet Pump
Description: J10
HP: 1

 

SPECIFICATIONS

Pump:

  • Pipe connections: 1¼" NPT suction, 1" NPT dis­charge, 1" NPT drive (pressure)
  • Pressure switch: AS4 preset at 30-50 PSI

Motor:

  • NEMA standard
  • 60 Hz
  • ½ – 1½ HP, 115/230 V capacitor start (whether hooked up using 115v or 230v power consumption of the pump remains the same)
  • Single phase
  • 3500 RPM
  • Built-in overload with automatic reset
  • Stainless steel shaft
  • Rotation: clockwise when viewed from motor end
  • UL778 listed

Maximum temperature: 140°F

 

FEATURES

Convertible: May be used on shallow or deep well applications using appropriate Gould’s Water Technology fittings.

Serviceable:

  • Back pullout design for service without disturbing piping.
  • Two compartment motor for access to wiring and replaceable components.
  • Nozzle clean out plug in shallow well adapter.
  • Corrosion resistant, plastic tubing and fittings are easily removed for cleaning. Premium O-ring design fittings need only be hand tight to seal.

Impeller: F.D.A. compliant, glass filled Noryl®. Corrosion and abrasion resistant.

Diffuser (Guidevane): Bolt down Lexan® diffuser has stainless wear ring for extended performance in abrasive conditions.

Powered for Continuous Operation: Pump ratings are within the motor manufacturer’s recommended working limits. Can be operated continuously without damage.

Corrosion Resistant: Electro-coat paint is baked on.

Protected Mechanical Seal: Diaphragm retains water in the casing to ensure the mechanical seal can never run dry.

Excellent Air Handling Ability: After initial priming the pump has the ability to re-prime itself.

 

SYSTEM COMPONENTS

Basic Pump Unit: Includes pump and motor, pres­sure gauge and bushing, pressure switch with tub­ing and fittings.

NOTE: THE TUBING COMES CONNECTED FOR SHALLOW WELL USE. A DEEP WELL SET UP RE­QUIRES A JDW FITTINGS PACKAGE OR AN AV22 KIT.

Both include additional fittings and a 24" tubing to connect to a pressure control valve.

ADDITIONAL COMPONENTS REQUIRED

  • Shallow Well Package: Includes shallow well adapter, nozzle, venturi (diffuser), gasket, bolts and pipe plugs OR
  • Deep Well Package: Choose either a twin pipe or packer style.
  • Twin pipe includes jet body, nozzle, venturi (dif­fuser) and foot valve.
  • Packer includes packer body, nozzle, venturi (dif­fuser), and built-in check valve.

NOTE: Packer systems also require a packer adapter on the wellhead.

Deep well systems require a pressure control valve.

NOTE: YOU MUST HAVE A JDW OR AV22 KIT TO MAKE THE PRESSURE SWITCH CONNECTION.

Pressure tank required on all systems.

 

Does your application require higher pressure? See our high pressure multi-stage pumps by Gould's. Click Here

 

View shallow well adapter

 

View the pressure control valve

 

Price: $906.00
Sale Price: $529.00
Available
Purchase Selections



Click Image For More Details
1-1/2HP J15 Deep Well Cast-Iron Jet Pump

 

1-1/2HP J15 Deep Well Cast-Iron Convertible Jet Pump
Description: J15
HP: 1-1/2

 

SPECIFICATIONS

Pump:

  • Pipe connections: 1¼" NPT suction, 1" NPT dis­charge, 1" NPT drive (pressure)
  • Pressure switch: AS4 preset at 30-50 PSI

Motor:

  • NEMA standard
  • 60 Hz
  • ½ – 1½ HP, 115/230 V capacitor start (whether hooked up using 115v or 230v power consumption of the pump remains the same)
  • Single phase
  • 3500 RPM
  • Built-in overload with automatic reset
  • Stainless steel shaft
  • Rotation: clockwise when viewed from motor end
  • UL778 listed

Maximum temperature: 140°F

 

FEATURES

Convertible: May be used on shallow or deep well applications using appropriate Gould’s Water Technology fittings.

Serviceable:

  • Back pullout design for service without disturbing piping.
  • Two compartment motor for access to wiring and replaceable components.
  • Nozzle clean out plug in shallow well adapter.
  • Corrosion resistant, plastic tubing and fittings are easily removed for cleaning. Premium O-ring design fittings need only be hand tight to seal.

Impeller: F.D.A. compliant, glass filled Noryl®. Corrosion and abrasion resistant.

Diffuser (Guidevane): Bolt down Lexan® diffuser has stainless wear ring for extended performance in abrasive conditions.

Powered for Continuous Operation: Pump ratings are within the motor manufacturer’s recommended working limits. Can be operated continuously without damage.

Corrosion Resistant: Electro-coat paint is baked on.

Protected Mechanical Seal: Diaphragm retains water in the casing to ensure the mechanical seal can never run dry.

Excellent Air Handling Ability: After initial priming the pump has the ability to re-prime itself.

 

SYSTEM COMPONENTS

Basic Pump Unit: Includes pump and motor, pres­sure gauge and bushing, pressure switch with tub­ing and fittings.

NOTE: THE TUBING COMES CONNECTED FOR SHALLOW WELL USE. A DEEP WELL SET UP RE­QUIRES A JDW FITTINGS PACKAGE OR AN AV22 KIT.

Both include additional fittings and a 24" tubing to connect to a pressure control valve.

ADDITIONAL COMPONENTS REQUIRED

  • Shallow Well Package: Includes shallow well adapter, nozzle, venturi (diffuser), gasket, bolts and pipe plugs OR
  • Deep Well Package: Choose either a twin pipe or packer style.
  • Twin pipe includes jet body, nozzle, venturi (dif­fuser) and foot valve.
  • Packer includes packer body, nozzle, venturi (dif­fuser), and built-in check valve.

NOTE: Packer systems also require a packer adapter on the wellhead.

Deep well systems require a pressure control valve.

NOTE: YOU MUST HAVE A JDW OR AV22 KIT TO MAKE THE PRESSURE SWITCH CONNECTION.

Pressure tank required on all systems.

 

Does your application require higher pressure? See our high pressure multi-stage pumps by Gould's. Click Here

 

View shallow well adapter

 

View the pressure control valve

 

Price: $1,050.00
Sale Price: $659.00
Available
Purchase Selections

 

J Plus Deep Well Jet Pumps Ship "FREE"

 

   J Plus deep well jet pumps are used when the surface of the water exceeds 25 feet from the earths surface. The J Plus deep well jet pumps are commonly used for dometic water supply into the home when used with the proper sized pressure tank. The J Plus deep well jet pump is a twin pipe system and the J Plus pump has 2 suction pipes. There are two methods of installation. One is a twin pipe system which requires 2 pipes (1-1/4" & 1" pipe sizes) to be installed in the well casing (minimum casing size of 3" ID) that will be attached at the point of suction to a jet assembly (jet assembly's vary with depth to surface of the water measured from the earths surface). The second method is a packer system which requires the proper packer adapter to be installed at the top of the well casing (casing sizes of 2" ID & 3" ID). The packer adapter seals the well casing using the casing as one pipe (drive water) and one pipe (suction) extending from the packer into the water. See installation intructions below for more installation detail. An output pressure requlator (AV22 kit) is required for both installation methods with recommeded pressure settings for each different application. To use as a shallow well jet pump, a shallow well jet package is required and is available seperately. The J Plus is also easy to repair. We have always modified the J Plus deep well jet pump in its factory box as the factory packaging is not sufficient for shipping without risk of damage.

 

Deep Well Jet Pump Brochure

Instruction Manual

Jet Pump Repair Parts by Model

 

Goulds Jet Pumps Ship FREE!