J Plus Deep Well Jet Pumps Ship "FREE"
J Plus deep well jet pumps are used when the surface of the water exceeds 25 feet from the earths surface. The J Plus deep well jet pumps are commonly used for dometic water supply into the home when used with the proper sized pressure tank. The J Plus deep well jet pump is a twin pipe system and the J Plus pump has 2 suction pipes. There are two methods of installation. One is a twin pipe system which requires 2 pipes (1-1/4" & 1" pipe sizes) to be installed in the well casing (minimum casing size of 3" ID) that will be attached at the point of suction to a jet assembly (jet assembly's vary with depth to surface of the water measured from the earths surface). The second method is a packer system which requires the proper packer adapter to be installed at the top of the well casing (casing sizes of 2" ID & 3" ID). The packer adapter seals the well casing using the casing as one pipe (drive water) and one pipe (suction) extending from the packer into the water. See installation intructions below for more installation detail. An output pressure requlator (AV22 kit) is required for both installation methods with recommeded pressure settings for each different application. To use as a shallow well jet pump, a shallow well jet package is required and is available seperately. The J Plus is also easy to repair. We have always modified the J Plus deep well jet pump in its factory box as the factory packaging is not sufficient for shipping without risk of damage.
Goulds Jet Pumps Ship FREE!