VP10 1HP 115V All In One Water Pressure Booster Pump

If you are experiencing a pump that won't shut off, don't be so fast to blame the pump. The pump needs 2 things to shut off.  No water flow and the proper shut-off pressure. 

Example:  A toilet leak (or any leak in the system) will create, won't stop running because of flow. Recommended - Install a gate valve or ball valve and pressure gauge on the outlet, prior to the system, to be sure there is no leak in the system and you have proper shut-off pressure.  While pump is running, close the valve, if the pump shuts off, you have a leak in your water system.

Flint and Walling VP10 - IN STOCK & SHIPS FREE!

NEW - Now with Stainless Steel Impellers

Applications

The VP10 series pump is designed for water supply and pressure boosting in residential, commercial and light industrial applications where low or inadequate water pressure exists. It is suitable for boosting pressure from underground or surface water supplies. 

Suitable liquids

Potable water or other clean and non-corrosive liquids. 

Operating Conditions

1.  Ambient temperature: Max. +104F (40C)
2.  Liquid temperature: + 39F(4C) ~ +104F (40C)
3.  System pressure : Max. 120 PSI
4.  Relative humidity: Max. 85% (RH)

Flint and Walling All-In-One City Pressure Booster 

Consists of pump, motor, stainless steel pressure tank and electronic controller.
(No Pressure Tank Required With This Pump)

Installs on your incoming water line boosting existing water pressure or can be used on a shallow well. Can be mounted indoors or outdoors. 

Features

1. The VP10 is a complete, all-in-one unit, consisting of pump, motor, pressure tank, and electronic controller. The built-in electronic controller ensures that the pump starts automatically when water is consumed and operates continuously until water is not required. It will also protect the pump when it is in faulty conditions.
2. Compact design and quiet operation make the VP10 series suitable for many applications.
3. Impellers are constructed of stainless steel for greater durability.
4. The built-in indicator lights on top panel will display the pump?s working condition and diagnosis.
5. The VP10 now has higher output pressure and is ideal for tank system that require higher boost pressure.
6. The built-in protective functions will shut off the pump and automatically reset in case of:
   • Dry run
   • Excessive temperature
   • Rapid cycling
   • Dead head
7.  Offer the new designed cast aluminum motor for higher efficiency and lower amperage draw.

Product Specifications

Pump Performance Chart

F&W All in One City Pressure Booster Technical Brochure

 F&W All in One City Pressure Booster Technical brochure