F&W CPH Convertible Jet Pumps

Flint & Walling Products IN-STOCK & SHIPS FREE!

Features and Benefits

Convertible Jet Pumps - For Shallow or Deep Well Applications.

Whether operating as a shallow well or deep well pump, count on F&W's CPH jet pumps to deliver more water at full city pressures. These pumps provide higher single stage capacities and pressures; depths to 140' (43 m), capacities to 1,800 GPH (6,814 LPH) and as much as 90 PSI.

CPH models feature the famous Flint and Walling "Service Plus" motor, available with Uni-frame flange construction. The F & W 56 frame, double ball bearing motor offers the ultimate in performance and dependability.

Designed for years of trouble-free operation and simple, swift, on-site servicing, the CPH features unique interchangeability of replacement parts to keep inventories at a minimum.

Features:

• Suction lift: 0' ? 25' (0 - 8 m) for shallow well applications
• Vertical distance to water: up to 140' (43 m) for deep well applications

Includes pump, motor and pressure switch.

Notes:

• For shallow well applications, order ejector separately.
• For deep well applications, order ejector, control package (134349) and pressure gauge separately.

Product Specifications

• Motor: 1/2, 3/4 and 1 HP
• Hertz: 60 Hz
• RPM: 3450 RPM
• Volts: 115 or 230 Volt

Technical Data

Model Comparison Charts

Motor Specification Chart, CPH Convertible Jet Pump Series, 60hz

Product Specification Chart, CPH Convertible Jet Pump Series, 60hz 

Pump Performance Charts

Performance Chart, CPH Deepwell Capacities Jet Pumps, 60hz

Performance Chart, CPH Shallow Well Pump With Convertible Ejector Jet Pumps, 60hz

Performance Chart, CPH Deep Well Capacities With 2" Single Pipe Ejector Jet Pumps, 60hz

Catalog:

FW0180, CPJ CPH EK FJ Catalog, 60hz

Technical Support

020183, Convertible Jet Instructions, 60hz

FW0032, CPH Series Repair Parts, 60hz 

Is your Jet Pump Not Producing Pressure Like it Used to?

Is your jet pump not producing the pressure it used to? In the front on most shallow well jet pumps and deep well jet pumps with shallow well adapters there is a 1/4" pipe plug located in the front of the pump or shallow well adapter where the center of impeller would line up (usually right below the suction pipe). Remove that 1/4" plug and make sure the jet is open and not plugged. This is a common occurrence and by cleaning this jet from being restricted or plugged can renew your jet pumps pressure.