4" 1PH 2 Wire Submersible Motors |
The Franklin 4" 2 wire motor is a simpler approach to submersible motors up to 1-1/2HP and eliminates the need for a control box to get the motor started. It uses 2 power wires and a ground wire for a total of three leads wires from motor (grounds are not counted in motor lead description). The 4" submersible pump and motor assembly were designed to fit inside a 4" ID. well casing. Franklin submersible 2 wire motors are commonly wired in series with a pump pressure switch for automatic on an off operation using the proper pressure tank. The power leads can also be wired directly to any power supply matching the voltage required for manual starting and stopping the motor.
Replacement option for Centri-Pro, Pentek and Grundfos submersible motors.
Click the links below for commonly needed information.
Franklin Super Stainless Motor Brochure
Franklin AIM Catalog/Motor Trouble Shooting on Page 44
Use of Engine Driven Generator Data
Franklin Electric Submersible Motors Ship FREE in 24 hrs. of order!